Diagnostic Fees: What to Charge and How to Explain It
Diagnosis uses your best technician and your dearest equipment, and most workshops give it away. How to structure a diagnostic fee in levels, set it from your own labour rate, decide whether to credit it against the repair, explain it to a customer in one sentence, and make it something they book and accept upfront.

"Can you just have a quick look?" is the most expensive sentence in the trade. It sounds like nothing. Ten minutes, a scan tool, a nod. What it actually asks for is your most experienced technician, on equipment that cost more than some of the cars it's plugged into, working out the hardest part of the job, for free. And if the answer is a $60 sensor the customer can order online, that's the last you'll see of them.
Most workshops know they should charge for diagnosis. Fewer do it consistently, because the fee feels awkward to say out loud. This guide is about making it routine: how to structure it, how to set the number, whether to credit it against the repair, the exact words that work at the counter, and how to turn it into something customers book and accept before they arrive.
If you only read one paragraph
Charge for diagnosis, quote it upfront, and structure it in levels: a scan and report at about half an hour, a standard diagnostic at one hour, and extended testing in approved blocks. Set the price from your own labour rate; many shops run a slightly higher rate for diagnostic work. Decide once whether you credit the fee against the repair and say it the same way every time. Explain what the customer gets, a written report they keep, in one sentence. Get approval in writing before you start, stop at the approved limit, and put the diagnostic on your service menu at a fixed price so customers accept it when they book.
Why the "free look" costs so much
Diagnosis is the most under-charged work in a workshop for three reasons that compound.
- It uses your best person. The technician who can find an intermittent fault is the one whose hours are worth the most.
- It uses your dearest equipment. A capable scan tool runs from a few thousand dollars to ten thousand, plus yearly subscriptions, plus the scope, the smoke machine and the wiring data.
- It's where the value is. Fitting the part is often the easy half. Knowing which part, and being right, is what the customer is really paying for.
Give that away and three things follow. Your billable hours drop, which pushes up the rate you need on everything else; the labour-rate guide shows how quickly lost hours do that. You train customers to expect it. And you attract the people who want an answer to take somewhere cheaper.
What customers pay now
Australian price guides for consumers put a basic fault-code scan at around $100 to $150 and the usual range for a diagnostic at about $100 to $250, with hard-to-trace electrical faults above that. Treat those as a sense of what the public already expects rather than a target. The point is that a diagnostic fee isn't unusual. Customers pay one at the dealer without blinking.
Structure it in levels
One flat "diagnostic fee" causes arguments, because a loose battery terminal and a network fault that takes a day aren't the same job. Levels solve it. The example prices assume a $150 an hour labour rate.
| Level | What the customer gets | Example price |
|---|---|---|
| Scan and reportAbout half an hour | Codes read and recorded, a visual check, a short written summary of what the codes point to and what testing is needed | $75 to $95 |
| Standard diagnosticOne hour | Up to an hour of testing to a confirmed cause, or a clear plan if more time is needed, with a written report and a quote for the repair | $150 |
| Extended diagnosticPer additional hour | Further testing for intermittent, electrical or network faults, approved one block at a time | $150 an hour, each block approved first |
Give them plain names. "Diagnostic assessment" works better than "scan", because a scan is what the parts store does for nothing. If the car obviously needs the standard level, don't sell the cheaper one first and then come back for more.
Setting the number
- Start from your labour rate. A diagnostic hour should never be cheaper than any other hour. If you haven't worked your rate up from your own costs yet, do that first.
- Consider a diagnostic rate. Many strong workshops charge a little more per hour for diagnostic work than for general servicing, on the grounds that it ties up their most skilled person and most expensive gear. Ten to twenty per cent above the general rate is a common step.
- Charge whole steps. Half an hour and one hour. Don't bill eleven minutes.
- Price the first level to be said easily. A round number you can say without flinching beats a precise one you mumble.
Should you credit it against the repair?
This is the question owners argue about most, and there's no single right answer. There is a wrong one: deciding case by case, which means the confident customers get it credited and the polite ones don't.
| Policy | For | Against |
|---|---|---|
| Credit it in full if they go ahead | Easiest to say yes to. Rewards the customer for staying | It's a discount on labour you performed. On small repairs it can wipe out the margin |
| Credit the first level only | Keeps the easy yes, limits the giveaway | One more rule to explain |
| Never credit it | Diagnosis is paid work like any other. Simple, consistent | Slightly harder first conversation. The fee has to be fairly priced |
If you do credit it, be honest with yourself about where the money comes from. A repair quote that quietly has the diagnostic time built back in isn't a credit, and customers who compare quotes will notice.
How to explain it
The fee goes wrong when it's apologised for. Say what the customer gets, name the price, and ask.
On the phone:
"To find out what's causing that, we'd book it in for a diagnostic assessment. That's an hour of testing by a qualified technician and a written report of what's wrong and what it'll cost to fix. It's $150. Would Thursday morning suit?"
When they ask for a quick look:
"I can't tell you anything reliable from a quick look, and I'd rather not guess with your money. The assessment is $150 and you'll get a written answer."
When the parts store read the code for free:
"That's handy, it tells us which system flagged a problem. What it doesn't tell us is whether the sensor's failed, the wiring to it has, or something else is making it read wrong. Testing is how we avoid replacing parts that weren't the fault."
When they push back on price:
"I understand. The alternative is fitting the most likely part and hoping, and that usually costs more. With the assessment you'll know exactly what you're dealing with, and the report is yours whatever you decide."
Notice what isn't in there: no apology, no explanation of what the scan tool cost, no "unfortunately we have to charge".
Approval and the report
A diagnostic fee is only as good as the record that the customer agreed to it.
- Get approval before the car goes on the hoist, in writing where you can: a signature, a text reply or an online booking for the service.
- State the limit. "Approved for one hour of diagnostic time, $150. We'll call before doing anything further."
- Stop at the limit. If the fault isn't found, report what's been tested and ruled out, and ask for the next block.
- Give them something to keep. A short written report: the complaint in their words, the codes found, the tests done, the cause, the recommended repair and its price. Photos help. This is the thing that makes the fee feel like a purchase and not a toll.
The report also protects you. When a customer declines the repair and returns in a month saying you "looked at it and didn't fix it", the report shows what you found and what they chose. It's the same discipline that prevents unpaid bills and abandoned cars.
When the fault won't show itself
Intermittent faults are where diagnostic fees are won or lost. The car behaves perfectly in the workshop and the customer suspects you of doing nothing.
- Set the expectation at the start. "Faults that come and go can take several sessions to catch. We'll charge for the time we spend and tell you what we've ruled out each time."
- Ask for the pattern. When does it happen: cold, hot, wet, over bumps, with the air conditioning on? Write it on the job.
- Charge for the time, not the result. An hour spent ruling out the charging system is an hour of real work.
- Offer the alternative. Sometimes the sensible advice is to drive it until the fault is more frequent. Saying so earns trust.
Make it something they book
The easiest diagnostic fee to collect is one the customer chose before they arrived. Put "Diagnostic assessment" on your service menu with its price and a one-line description, exactly like a logbook service. A customer who books it online has seen the price, picked a time and accepted the fee, with no counter conversation at all.
On a WorkshopBook page that's a service with a fixed price and a set duration, so it also holds the right amount of time in the diary. For problems that don't fit the menu, customers can describe what's happening in a quote request; you reply with a priced quote, drafted with the AI estimator if you like, and they accept it online. Either way the approval is recorded before the car arrives.
If your workshop is mostly diagnostic and repair work, with few fixed-price jobs, this matters even more: the assessment is your front door, and it should be the first thing a new customer can book.
The mistakes
- Charging some customers and not others. The fee has to be a policy, not a mood.
- Quoting it after the work. A diagnostic fee the customer first hears about on the invoice is a dispute.
- Calling it a scan. You've priced yourself against a free service.
- Running past the approved time. The second hour needs its own yes.
- No written findings. The customer has nothing to show for the money.
- Burying it in the repair. When the diagnostic time is hidden in an inflated repair quote, the customer who shops the quote thinks you're dear, and the one who declines pays nothing.
- Discounting it to win the job. If you'll drop it the moment someone frowns, it was never a fee.
Frequently asked questions
How much should a mechanic charge for a diagnostic in Australia?
Price it from your labour rate, not from a guess. A scan and report is typically around half an hour of labour, and a standard diagnostic is one full hour, so at a $150 rate that is about $75 to $95 and $150. Australian price guides put what customers commonly pay at roughly $100 to $250, with difficult electrical faults costing more.
Should a workshop charge for diagnosis?
Yes. Diagnosis is skilled labour on your most expensive equipment, and it is often the hardest part of the job. Giving it away discounts every repair that follows and attracts customers who take the answer elsewhere. Quote the fee upfront and get approval before starting.
Should the diagnostic fee be credited toward the repair?
It is your call, and both approaches work if applied consistently. Crediting it makes the fee easier to accept, but it is a discount on labour you actually performed. A common middle path is to credit only the first level, or to credit nothing and price the fee fairly. Decide once and say it the same way every time.
How do I explain a diagnostic fee to a customer?
Keep it to one sentence about what they get: an hour of testing by a qualified technician and a written report of what is wrong and what it will cost to fix, which is theirs to keep. Then ask for approval. Do not apologise for the fee or justify it at length.
What if the customer says the parts store scanned it for free?
Agree that reading a code is quick, then explain the difference. A fault code tells you which system reported a problem, not which part has failed or why. Testing is what separates a faulty sensor from the wiring or the fault that made the sensor report. That testing is what the fee pays for.
What if the fault cannot be found in the first hour?
Stop at the approved limit, report what has been tested and ruled out, and recommend the next step with a time estimate. Ask for approval for each further block. Intermittent and network faults are legitimately slow, and customers accept that when they are told at each stage.
How much does WorkshopBook cost?
$79 per workshop per month, in Australian dollars including GST, with every feature included and no per-booking fees. Every workshop gets 30 days free with no card required, and there's no lock-in: it's month to month and you can cancel any time. Groups with two or more sites get per-site pricing.
Put the assessment on the menu. Create your booking page with a priced diagnostic service customers can book tonight, and quote requests for everything else. Free for 30 days, no card.
See it for your workshop
Ready to see these results in your workshop?
Leave your details and we'll walk you through WorkshopBook set up for a workshop like yours — bookings, reminders, reviews and retention. One quick call, no pressure.