Parts Markup for Australian Workshops: How to Set It, With a Worked Matrix
Most workshops put one flat percentage on every part and leave money on the cheap ones while overpricing the dear ones. The difference between markup and margin, what Australian workshops actually charge, a sliding-scale matrix you can adapt, where retail price sets a ceiling, and how to check your parts margin every month.

Workshop owners will argue for an hour about their labour rate and spend thirty seconds on what they charge for parts. Yet parts are close to half of a typical invoice, and the profit on them is often what separates a good month from a break-even one. The usual method is one percentage, applied to everything, chosen years ago and never revisited.
This guide is the companion to our labour-rate guide. It covers the difference between markup and margin, what Australian workshops actually do, why a flat percentage is the wrong tool, a sliding-scale matrix you can adapt, the retail-price ceiling, the lines that aren't quite parts, and how to check the result each month. The figures are examples to work from, not benchmarks to copy. Your own costs decide the answer.
If you only read one paragraph
Markup is profit over cost; margin is profit over selling price, and a 50% markup is only a 33% margin. Australian workshops report an average parts markup of about a third, and nearly half use one flat percentage. Don't. Use a sliding scale: a high percentage on cheap parts, where the handling costs more than the part, and a low one on expensive parts, where customers check the price. Cap easily compared items at retail. Charge for supplies and disposal deliberately. Then check one number every month, parts gross margin, and adjust the scale until it's where your business needs it.
Markup and margin are not the same number
This trips up more owners than anything else in pricing, so it's worth thirty seconds.
- Markup is your profit as a percentage of what the part cost you.
- Margin is your profit as a percentage of what you sold it for.
Buy a part for $100 and sell it for $150. The profit is $50. That's a 50% markup, because $50 is half of the $100 cost. It's a 33% margin, because $50 is a third of the $150 price. Same part, same profit, two different percentages.
| Markup on cost | A $100 part sells for | Margin on the sale |
|---|---|---|
| 25% | $125 | 20% |
| 33% | $133 | 25% |
| 50% | $150 | 33% |
| 67% | $167 | 40% |
| 100% | $200 | 50% |
It matters because accountants and benchmarks talk in margin, while most workshops set prices in markup. An owner who's told to aim for a 40% parts margin and sets a 40% markup has actually set a 29% margin, and will wonder all year where the money went. To get from a target margin to the markup you need: markup = margin ÷ (1 − margin).
What Australian workshops actually do
The best local data comes from Capricorn, the member-owned buying group, which surveys thousands of workshops for its State of the Nation report. In the 2022 results:
- 45% of workshops set one standard percentage markup on all parts.
- Four in ten matched the retail price, up from a third two years earlier.
- A third decided based on the cost of the part, and three in ten used their best judgement.
- The average parts markup reported was 32%, after 31% in 2020 and 36% in 2021.
A 32% markup is a 24% margin. So the typical workshop keeps about a quarter of every parts dollar, and nearly half of workshops arrive at their price with a single number. Both of those leave room to do better without charging any individual customer an unfair price.
Why one flat percentage is the wrong tool
A flat percentage treats a $6 oil filter and a $900 alternator the same way. They aren't the same.
- On the filter, 32% earns you $1.92. For that you looked up the part, ordered it, received it, checked it, put it on a shelf, picked it for the job, and you'll replace it free if it's faulty. You've lost money handling it.
- On the alternator, 32% adds $288. The customer can find the retail price on their phone in the waiting room, and a big percentage on a big part is exactly what sends people online to buy their own.
The cost of handling a part is roughly the same whatever it's worth. So the percentage has to fall as the cost rises: enough dollars on the small parts to pay for the handling, and a modest percentage on the large ones that's still a meaningful number of dollars.
A worked matrix
This is a sliding scale to adapt, not a standard. The bands and percentages are an illustration; move them to suit your suppliers, your market and the margin you need.
| Your cost (ex GST) | Markup | Example: cost to sell | Margin |
|---|---|---|---|
| Under $10 | 150% | $8 to $20 | 60% |
| $10 to $30 | 100% | $20 to $40 | 50% |
| $30 to $75 | 75% | $60 to $105 | 43% |
| $75 to $150 | 55% | $100 to $155 | 35% |
| $150 to $400 | 40% | $250 to $350 | 29% |
| $400 to $1,000 | 30% | $520 to $676 | 23% |
| Over $1,000 | 22% | $1,500 to $1,830 | 18% |
Run one job through it. A service uses an $8 filter, a $60 set of pads and a $520 radiator. At a flat 32% the parts sell for $776 and you keep $188, a 24% margin. On the scale they sell for $20, $105 and $676: $801 in total, of which you keep $213, a 27% margin. The customer pays $25 more on an $800 parts bill, the dear part is priced lower than before, and the extra comes from the small items nobody compares.
The effect is bigger than one job suggests, because a workshop sells far more cheap parts than dear ones. Filters, plugs, wiper blades, bulbs, belts and fluids go out the door all day. Lifting the margin on those from a quarter to a half changes the month.
Two practical notes on building your own:
- Watch the steps. At a band boundary a slightly dearer part can come out cheaper than the one below it. Either smooth the percentages or apply a minimum dollar margin per band.
- Set a minimum. Many workshops add a floor, for example at least $5 on any part, so the smallest items aren't given away.
The retail-price ceiling
Four in ten workshops in the Capricorn survey simply match retail. It's easy and it's defensible, but as a whole pricing method it has a flaw: your supplier's recommended price wasn't set with your costs in mind. On some lines it leaves a healthy margin and on others almost nothing.
The better use of retail price is as a ceiling on the parts customers can check:
- Batteries, wiper blades, globes, common brake pads, engine oil by the bottle. Searchable in seconds. Price at or just under retail, whatever the matrix says.
- Tyres. The most price-compared product in the trade. Low percentage, real dollars, and your fitting and balancing charged properly.
- Everything else. A thermostat housing or a control arm bush isn't something customers price-check. Use the matrix.
So the rule becomes: the matrix sets the price, and retail caps it where a customer could look it up.
What the margin on a part pays for
When a customer says "I can get that part for half the price online", they're comparing a box on a doorstep with a fitted, warranted repair. It helps to be clear, with yourself and with them, about what the margin covers.
- Finding the right part. Looking up the correct item for that build date and engine code, and being responsible when the catalogue is wrong.
- Ordering, freight and receiving. Someone's time, several times a day.
- Returns. The wrong, damaged or surplus parts that go back, and the ones that can't.
- Warranty. When you supply a part, you stand behind it. If it fails, you replace it and usually wear the labour, then chase the supplier.
- Stock. Money sitting on a shelf so the car isn't waiting on a delivery.
- Cash flow and card fees. You carry the supplier account and pay the merchant fee on the whole invoice.
The lines that aren't quite parts
- Workshop supplies. Rags, brake cleaner, grease, cable ties, the odd fastener. Either build them into your labour rate or charge a small, clearly named line, usually a low percentage of labour with a dollar cap. Pick one. The mistake is doing neither.
- Waste and disposal. Used oil, filters, coolant and tyres cost money to dispose of properly. Itemise it at a fixed amount per job type.
- Fluids from bulk. Oil bought by the drum should be sold by the litre at a price that reflects what the customer would pay for it packaged, not at drum cost plus a third.
- Sublet work. Machining, wheel alignments or tyre fitting you send out. You're organising it, transporting the car or the part, and guaranteeing the result, so it carries a margin like any other bought-in item.
- Special-order freight. Charge it as its own line when a part has to come overnight at the customer's request.
The special cases
- Genuine parts from the dealer. Trade discounts are thin and list prices are public. Many workshops sell at or near list and keep the trade discount as their margin.
- Customer-supplied parts. No margin at all, plus the risk. Decide your policy in advance.
- Fleet and trade accounts. A negotiated discount off your normal scale, agreed once and applied consistently, in return for volume and prompt payment.
- Warranty and insurance work. The other party often dictates parts pricing. Know the rules before you accept the job.
- Second-hand and reconditioned parts. A lower price for the customer, with the warranty position explained in writing.
Checking it's working
One number, once a month, from your accounting software:
Parts gross margin = (parts sales − cost of those parts) ÷ parts sales.
If you've been on a flat third, you'll see something near 24%. After a few months on a sliding scale, see where it lands and whether customers have noticed. Usually they haven't, because nobody compares the price of a cabin filter. Then:
- Review the scale quarterly. Supplier prices move. Your bands should move with them.
- Look at discounts given. A scale that's overridden at the counter every second job isn't a scale.
- Check returns and warranty costs against the margin that's meant to cover them.
- Read it alongside labour. Parts margin and labour rate do the same job between them. As Capricorn's chairman put it when online parts were first biting, hourly rates for labour need to increase as parts margins reduce.
Putting it into your quotes
- Quote the job. A total for the repair, with parts shown at their selling price. Not cost plus a visible percentage.
- Work ex GST, quote including it. Apply your markup to the GST-exclusive cost, then add GST to the total the customer sees.
- Make it the same whoever writes the quote. If the owner prices parts one way and the service adviser another, customers find out. Write the scale down, or put it in the system.
- Don't discount parts to win the job. A discount is never only on the parts. It comes straight off the profit on the whole job.
If you quote through WorkshopBook, your labour rate and a parts markup are set once in your pricing settings, and the AI estimator uses them to price every quote the same way: it scopes the labour hours and typical parts for the job, and the dollar figure comes from your two numbers. It takes a single percentage, so if you run a sliding scale, enter the blended markup your scale produces across a normal month and adjust individual parts on the quote where it matters. Pair it with a properly priced diagnostic step and the two biggest sources of given-away work are closed.
Frequently asked questions
What is a normal parts markup for a mechanic in Australia?
There is no single standard. In Capricorn's State of the Nation survey the average parts markup reported by member workshops was 32% in 2022, and 45% of workshops applied one standard percentage to every part. Many well-run workshops use a sliding scale instead, with a high percentage on cheap parts and a low one on expensive parts.
What is the difference between markup and margin?
Markup is profit as a percentage of what the part cost you. Margin is profit as a percentage of what you sold it for. A part that costs $100 and sells for $150 has a 50% markup and a 33% margin. Mixing the two up is the most common pricing mistake in the trade.
Should I charge recommended retail price on parts?
Use it as a ceiling on parts customers can easily look up, such as batteries, wipers and common brake pads. Do not treat it as your price list. Your supplier's recommended price was not set with your costs in mind, and on cheap parts it often leaves you with almost nothing for the handling.
Should I show the parts markup on the invoice?
No. Show each part at its selling price, as any retailer does. Your cost is your business. What customers respond to is a clear total for the job quoted before the work starts, not a breakdown of your margin.
Should I mark up genuine parts from the dealer?
Yes, though usually by less. Dealer trade discounts are thin and the list price is easy to check, so many workshops sell genuine parts at or near list. That still leaves the trade discount as margin for sourcing, collecting and standing behind the part.
Should I charge for workshop supplies and consumables?
Either build them into your labour rate or charge a small, clearly labelled line, usually capped. Rags, cleaners, grease and fasteners are real costs. What does not work is leaving them out of both, or adding a surprise percentage the customer first sees on the invoice.
How much does WorkshopBook cost?
$79 per workshop per month, in Australian dollars including GST, with every feature included and no per-booking fees. Every workshop gets 30 days free with no card required, and there's no lock-in: it's month to month and you can cancel any time. Groups with two or more sites get per-site pricing.
Price every quote the same way. Try WorkshopBook free for 30 days: set your labour rate and parts markup once, and send priced quotes customers accept online. No card, no contract.
See it for your workshop
Ready to see these results in your workshop?
Leave your details and we'll walk you through WorkshopBook set up for a workshop like yours — bookings, reminders, reviews and retention. One quick call, no pressure.