Customer-Supplied Parts: A Workshop Policy That Protects You
The customer has bought the parts online and wants you to fit them. Where a workshop stands under consumer law, what fitting them really costs, the three policies to choose from, the conditions and a printable acknowledgement form if you say yes, and the exact wording for the counter, the phone and the booking confirmation.

It arrives in a satchel on the passenger seat, or in a box on the counter with the tape already cut. "I got the pads and rotors online. Can you just fit them?" The customer has saved eighty dollars and is pleased about it. You've lost the margin on the parts, you've never heard of the brand, and you already know who they'll ring if the brakes squeal next month.
Every workshop faces this weekly, and most handle it differently each time depending on who's at the counter and how busy the day is. That inconsistency is the real problem. This guide sets out where you stand, what fitting customer parts actually costs, the policies to choose from, and wording you can put on the counter today. It's general information, not legal advice; have a solicitor look over any form you ask customers to sign.
If you only read one paragraph
Pick one policy and apply it to everyone. Saying no is simplest and is what most industry advice recommends. If you say yes, do it on written conditions: you inspect the part and can refuse it, nothing safety-critical, labour charged at a rate that reflects the missing parts margin, no warranty on the part, removal and refitting charged if it's wrong or fails, and a signed acknowledgement before work starts. You remain responsible for the quality of your own fitting whatever the form says. Tell customers the policy before they book, in writing, so the conversation never starts at the counter with a box.
Where you stand
Under Australian consumer law, a business that supplies goods guarantees those goods, and a business that supplies a service guarantees it will be carried out with due care and skill. When the customer brings the part, those two things come apart.
- The part. You didn't supply it, so the guarantees on the goods aren't yours to honour. If it's faulty, that's between the customer and whoever sold it to them.
- The fitting. You did supply that. Your obligation to do the work with due care and skill is the same as on any other job, and no sign or form removes it.
That sounds clean. In practice it isn't, and the industry's own guidance says so plainly. When a customer-supplied part fails, the first question is whether the part was defective or the fitting was. That's often impossible to prove either way, and the customer's first call is to the workshop, not the online seller. Capricorn's advice to its member workshops puts the conclusion bluntly: the best protection is to avoid fitting customer-supplied parts if you possibly can.
Two other things to check for your own business. Ask your insurance broker whether your policy responds to a claim involving a part you didn't supply. And remember that a failed part can do damage well beyond itself. A timing belt kit of unknown origin isn't a $90 risk.
What it really costs you
- The parts margin. A typical job is priced on labour plus a margin on parts, and that margin pays for ordering, freight, returns and warranty. The parts markup guide has the numbers. Fit the customer's parts at your normal labour rate and the job earns less than it costs to do.
- The wrong part. It's the right part for the wrong model year. The car is now in pieces on your hoist, the bay is blocked, and the customer wants to know why it isn't finished.
- The comeback. A noise, a warning light, a leak. Your technician spends an hour establishing that it's the part. Who pays for that hour?
- The second fitting. The replacement arrives. Fitting it again is another full labour charge that nobody discussed.
- The review. Whatever the cause, it's your name on the job.
Three policies
| Policy | What it means | The trade-off |
|---|---|---|
| We don't fit customer-supplied parts | One rule, no exceptions, stated before booking | You'll lose some jobs, mostly the ones that weren't going to make money |
| We fit them, on conditions | Accepted with inspection, exclusions, a labour rate that reflects it and a signed acknowledgement | Keeps the customer and the labour, at the price of more paperwork and some residual risk |
| It depends | Decided at the counter, case by case | The worst of both. Regulars get favours, strangers get refused, and nobody can explain why |
Most general workshops are best served by the first. The second makes sense where customers legitimately supply their own parts as a matter of course, which is common in performance, 4x4 and restoration work, or in a small town where being flexible is part of how you keep customers.
If you fit them: the conditions
- You inspect the part before it goes near the car, and you can decline it. Wrong part, damaged, no brand, no packaging, no proof of where it came from: no.
- Nothing safety-critical. Brakes, steering and suspension components, airbags and seatbelt parts, and tyres of unknown age are the usual exclusions.
- Labour reflects the missing margin. Either a higher hourly rate for this work or a stated fitting surcharge. In one Capricorn member survey about one workshop in eleven charged a higher labour rate to fit customer parts, which suggests most are absorbing the cost.
- No warranty on the part. Your workmanship is covered as always. The part is the customer's to take up with the seller.
- Removal and refitting are charged. If the part is wrong, faulty or fails later, the labour to take it out and fit another is a new job at the normal rate.
- The car doesn't wait on your hoist. If the part is wrong, the car is reassembled or moved at the customer's cost, and rebooked.
- The customer keeps the receipt and packaging, because they'll need them for any claim.
- It's noted on the invoice. "Customer-supplied part fitted", with the brand and part number.
- A signed acknowledgement, before work starts.
The acknowledgement form
One page, signed and dated before the job begins. Industry guidance suggests it should state that:
- The customer supplied the part, described by brand and part number.
- The workshop gives no warranty on a part it didn't supply.
- The workshop remains responsible, under consumer law, for the quality of its own fitting work.
- The customer has been told the risks, including that the part may not meet the vehicle manufacturer's specification.
- The customer releases the workshop from loss or damage caused by the part itself, and agrees that labour to remove or replace it will be charged.
Be realistic about what this achieves. The same guidance warns that even a signed release may not be enough if a customer pursues the matter. Its real value is earlier: it makes the customer stop and think at the counter, it records exactly what was fitted, and it ends most arguments before they start. Ask your solicitor or your motor trades association for a version suited to your state.
Free template: customer-supplied parts acknowledgement
A one-page form covering the points above, with space for the vehicle, the parts, your labour rate and both signatures. It's a template, not legal advice, so have it checked for your business and your state before you use it.
Wording you can use
A sign at the counter, if your policy is no:
"We supply and fit quality parts and stand behind every job with a warranty on parts and labour. For that reason we don't fit parts supplied by customers. Thanks for understanding."
A sign at the counter, if your policy is yes on conditions:
"Customer-supplied parts are fitted at our discretion, at our customer-parts labour rate, and with no warranty on the part. We don't fit customer-supplied brake, steering, suspension or airbag parts. Please ask before booking."
On the phone:
"We don't fit parts we haven't supplied, because we can't warrant them and if something goes wrong it's hard to sort out who's responsible. What I can do is quote you on the job with parts we stand behind. What's the car?"
When they say it's the same part you'd use:
"It may well be. The difference is that when we supply it, we check it's right for your car before it's ordered, and if it fails we fix it at our cost. That's what's in our price."
In the booking confirmation:
"Planning to bring your own parts? Please call us first. We fit customer-supplied parts only by arrangement and on our terms."
Why customers bring parts, and how to need the policy less
Nobody buys rotors online for fun. They do it because they looked up the price of the part, compared it with the line on a quote, and decided the workshop was taking them for a ride. You can reduce how often that happens.
- Keep easily compared parts close to retail. Batteries, wiper blades, common pads and filters are searchable in seconds. Make your margin on the parts nobody can price-check. The sliding scale in the markup guide does this by design.
- Quote the job, not a shopping list. "Front brakes, pads and rotors, fitted and tested, with a twelve-month warranty: $X" invites less arithmetic than six itemised lines.
- Say what the price includes. The right part first time, the warranty on parts and labour, and someone to call if there's a problem.
- Offer a choice. A good option and a better one. A customer who can pick the cheaper pad has less reason to go hunting.
- Publish your prices for common jobs. A customer who saw a fixed price on your booking page, and booked it, has already accepted it. How to set those prices.
The special cases
- Performance and enthusiast work. Customers choosing their own exhaust, turbo or suspension kit is normal. Use the conditions and the form every time, and be specific about what you will and won't tune or certify.
- Rare and classic parts. Sometimes the customer's part is the only one in the country. Fit it, document its condition with photos, and say in writing that you can't warrant it.
- Genuine parts bought from a dealer. Lower risk on quality, same loss of margin. Your labour policy should still apply.
- Trade customers and other workshops. Usually on an agreed labour-only rate, which is its own arrangement.
- The regular who's been coming for fifteen years. The hardest one. If you make an exception, make it under the same form. An exception with paperwork is a policy. An exception without it is a precedent.
Put it in writing everywhere
A policy the customer hears about for the first time at the counter is an argument. One they've already read is just how you work. Put it:
- On a sign at the counter.
- In your terms of trade and on the job card.
- In the description on your booking page.
- In your booking confirmation, where the customer reads it before they arrive. In WorkshopBook that's the confirmation footer in your settings, which is added to every confirmation email.
- As a line on any quote for a job where it's likely to come up.
Then train whoever answers the phone to say it the same way every time. Related reading: charging properly for diagnostic time, the other place workshops give work away.
Frequently asked questions
Should a mechanic fit parts supplied by the customer?
It is the workshop's choice. Many decline, because they cannot vouch for the part, they lose the parts margin, and they can still be drawn into a dispute if it fails. If you do fit them, do it under written conditions: inspect the part first, exclude safety-critical items, charge appropriately for labour and have the customer sign an acknowledgement.
Is a workshop liable if a customer-supplied part fails?
You are generally not responsible for the warranty on a part you did not supply, but you remain responsible for your own work fitting it, which must be done with due care and skill. The difficulty is that it is often hard to prove whether the part or the fitting caused the failure, which is why a written acknowledgement and good records matter.
Can a workshop refuse to fit customer-supplied parts?
Yes. A workshop can choose what work it takes on. The important thing is to have a clear policy, apply it to everyone and tell customers before they book, so nobody arrives with a box of parts and an expectation.
Should I charge more labour to fit customer-supplied parts?
Many workshops do, either with a higher hourly rate for that work or a fitting surcharge. Parts margin helps pay for ordering, returns and warranty, so when the parts are not yours that cost has to be recovered through labour. Whatever you choose, quote it upfront.
What should a customer-supplied parts waiver say?
That the customer supplied the part, that the workshop gives no warranty on it, that the workshop is still responsible for its own fitting work, that the customer has been told the risks including parts that may not meet the manufacturer's standard, and that removal and refitting will be charged if the part is wrong or fails. Have a solicitor check the wording. A printable template is included in this guide.
Which customer-supplied parts should a workshop never fit?
Most workshops that accept customer parts still refuse safety-critical items: brakes, steering and suspension components, airbags and seatbelt parts, and tyres of unknown age or history. They also refuse parts with no brand, no packaging or no proof of where they came from.
How much does WorkshopBook cost?
$79 per workshop per month, in Australian dollars including GST, with every feature included and no per-booking fees. Every workshop gets 30 days free with no card required, and there's no lock-in: it's month to month and you can cancel any time. Groups with two or more sites get per-site pricing.
Set expectations before they arrive. Create your booking page with your prices published and your policies on every confirmation. Free for 30 days, no card.
See it for your workshop
Ready to see these results in your workshop?
Leave your details and we'll walk you through WorkshopBook set up for a workshop like yours — bookings, reminders, reviews and retention. One quick call, no pressure.